DTH-TAQ: TENSION MONITORING MODULES  

 

The DTH-TAQ units enable tension monitoring and logging on any PC.

Choose from a wide variety of tension ranges, roller widths, and data transmission methods.

Any DTH sensor can be used with any TAQ module.

Different DTH units can be purchased for use with the same TAQ module.

Units are ready to use. Software for monitoring and logging are included.

                                               

        (Example of DTH + TAQ5000 shown above)                        (Example of tension monitoring screen)

 

DTH Type Tension Sensors

   DTHA with narrow roller                                DTHA with wide roller                                

 

 

        

 

 

 

 

 DTHA for web material

 

 

 

 

 

 

 

 

 

 DTHA Standard range Sensors

Type Range Roller Width
  N (grams) (mm)
DTHA2100 0.5 (50) 2.5
DTHA3100 1 (100) 3.4
DTHA3110 1 (100) 12
DTHA4100 2 (200) 3.4
DTHA4110 2 (200) 12
DTHA5100 5 (500) 4
DTHA5120 5 (500) 22
DTHA5140 5 (500) 42
DTHA6100 10 (1000) 4
DTHA6120 10 (1000) 22
DTHA6140 10 (1000) 42
DTHA7100 20 (2000) 4
DTHA7120 20 (2000) 22
DTHA7140 20 (2000) 42

 

DTHL High Tension Range Sensors

Type Range Roller Width
  N (grams) (mm)
DTLA2100 50 (5000) 22
DTLA3100 100 (10000) 22
DTLA4100 200 (20000) 22

 

 DTHW-A Type Wide Web Sensors

Type Range Roller Width
  N (grams) (mm)
DTHWA5120 10 (1000) 200
DTHWA5140 10 (1000) 400
DTHWA5160 10 (1000) 600
DTHWA6120 20 (2000) 200
DTHWA6140 20 (2000) 400
DTHWA6160 20 (2000) 600
DTHWA7120 50 (5000) 200
DTHWA7140 50 (5000) 400
DTHWA7160 50 (5000) 600

 (*) Please contact Izumi with ranges, roller widths not listed above.

 (**) Please contact Izumi for dimensions or CAD files on any of the above.

 

TAQ Type Data Transmission Modules

Type Data Acquisition Format      
         
TAQ 3000 Digital Display Only      
TAQ 4000S RS-232 to PC, Direct Connect      
TAQ 4000U USB to PC, Direct Connect      
TAQ 4000E RJ-45 Ethernet to PC, Direct Connect      
TAQ 5000 Wi-Fi to PC      
             
                     Details on Specifications          
    TAQ Common Specifications  
Model   TAQ3000 TAQ4000S TAQ4000U TAQ4000E TAQ5000  
Analog Input Type:   Single-ended Single-ended Differential Single-ended Single-ended  
Analog Resolution:   12-Bit  
Maximum Sampling Rate/s:   240  
Relative Accuracy:   0.25% of FSR  
Measurement Range:    +/- 10V  +/- 5V  +/- 10V  
Overvoltage Protection:    +/- 20V peak  
Display:   LED, 3 1/2 Digits NA  
PC Connector:   None DB-9F USB RJ-45 Wireless  
Communication Type:   None RS-232 USB 2.0 Ethernet 802.3 802.11b  
Maximum Cable Length:   NA 15m 5m 100m NA  
Power Input Voltage:    +5VDC (+/- 0.2Volts)  
Power Input Current:   200ma 50ma 150ma 700ma 1000ma  
Power Connector:   5.5mm long by 2.1mm dia. barrel jack, center positive  
Operating Temperature:   0 to 55C (32 - 131F)  
Storage Temperature:    -40 to 65C (-40 - 149F)  
Humidity:   10% to 90% R.H. non-condensing  
Enclosure Height:   46mm (1-13/16")  
Enclosure Width:   81mm (3-3/16")  
Enclosure Length:   165mm (6.5")  
Enclosure Weight:   380g (0.84lb)  
Enclosure Class:   NEMA 1, (IP65, NEMA 12 with optional enclosure kits/gaskets)  
   
    TAQ5000 Wi-Fi Radio Specifications
Ethernet Standard:   802.11b
Frequency:   2.4 GHz
Data Rate:   11, 5.5, 2, 1 Mbps with automatic fallback
Modulation:   CCK (11/5 Mps), DQPSK (2 Mbps), DBSK (1 Mbps)
Transmit Power:   16 dBm Typical
Maximum Range:   Indoor - 100 to 200 ft., Outdoor - 1000 ft. (with provided 1/4 wave antenna)
Receiver Sensitivity:    -82 dBm @ 11 Mbps
 -87 dBm @ 5.5 Mbps
 -89 dBm @ 2 Mbps
 -92 dBm @ 1 Mbps
Channels:   11 (USA/Canada), 13 (Europ), 14 (Japan)
Approvals:   CE, FCC Class A (with antenna provided)
   
    TAQ4000E / TAQ5000 Network Specifications
Setup Method:   Uses any web browser via built-in web server
IP Address Assignment:   Static IP, DHCP, Auto IP
Security:   Admin configuration pasword protected
WEP, WPA, PEAP, PSK, Strong SSL, DES, 3DES, AES
Protocols:    TCP, UDP, DHCP, SNMP, SSL/TLS, TELNET, RLOGIN,
RFC 2217, LPD, HTTP/HTTPS, SMTP, ICMP, IGMP, ARP
Web Access Modes:   Ad-Hoc, Infrastructure
Data Access Method:   PC Virtual COM port, RealPort software provided
   
    TAQ AC to DC  Power Supply
Type:   Standard US Receptacle mount
Input power:   100 - 240VAC
Input Frequency:   50 - 60 Hz
Output Power:   Regulated 5VDC
Output Current:   1000ma 
Output Plug:   2.1mm dia. barrel plug, center positive
Power Cord Length:   1828mm (72")
   
    Supplied Software
WinDaq Aqusition:   Strip chart display/recorder program for the data supplied via the virtual COM port.
WinDaq Waveform Browser:   Strip chart display program for review and analysis of recorded data files.
   

 

        

For additional information, contact mailto:us-sales@izumiinternational.com.
For technical questions about Web site, contact Webmaster.