|
DTHA Analog
Tension Sensors
Low cost
sensor unit
The DTHA type sensor can be used for
measuring tension of fibers or
sheet materials. The unit provides an
analog tension output signal.
<FEATURES>
*
Low Cost, High Accuracy
Each unit is equipped with a micro-chip to correct any deviations between
units, thus providing
a low cost means of accurate tension measurement.
The units have an high accuracy of +/- 2% to 4% F.S.
*
Pulley Type, 1 Piece Construction
The unit is of one piece construction, and it can be mounted and put to use
with no need to
adjust or calibrate.
*
Maintenance Free
The unit has a high overload rating, and also has no need for adjustment,
making it an ideal
choice for production line tension monitoring. There is no initial adjustment
at start-up.
*
Analog Output
The analog output convenient to use with existing monitoring equipment or
digital displays.
<SPECIFICATIONS>
|
|
DTHA2100 |
DTHA3100 |
DTHA4100 |
DTHA5100 |
DTHA6100 |
DTHA7100 |
|
Tension Rating (N) |
0.5 |
1 |
2 |
5 |
10 |
20 |
|
(grams) |
50 |
100 |
200 |
500 |
1000 |
2000 |
|
Output at Rated Tension (V) |
DC4V |
|
Accuracy |
+/- 4% of full scale |
+/- 2% of full scale |
|
Power Requirements |
+/- DC12V +/-0.2V |
|
Line Speed |
0 - 500 m/min |
|
Sensing Pulley Deflection |
Max 1.3mm |
|
Mounting Direction |
Upright on flat surface |
|
Weight |
370 g |
380g |
420g |
440g |
|
Operating Conditions |
0 - 40 degC / 25 - 85%
relative humidity |
|
Storage Conditions |
-10 - 85 degC / 25 -
90% relative humidity |
|
