CALL US: 864.288.8001Facebook FacebookLinkedInYoutubeGoogle

EFT-Tape

On conventional winding processes the wind roll of flat materials is cut at a certain width by a slitting machine and wound onto a large roll like disc (record) on winding machine. However, the cut materials are apt to be distorted, bent or wrinkled during the winding. Kamitsu Take-Up Winder Model EFT Bobbin traverse Type can solve these problems and wind flat materials onto the bobbin which can be used just after slitter process or re-wind from a disc shape of flat materials with the aid of feed rollers.
Description
On conventional winding processes the wind roll of flat materials is cut at a certain width by a slitting machine and wound onto a large roll like disc (record) on winding machine. However, the cut materials are apt to be distorted, bent or wrinkled during the winding. Kamitsu Take-Up Winder Model EFT Bobbin traverse Type can solve these problems and wind flat materials onto the bobbin which can be used just after slitter process or re-wind from a disc shape of flat materials with the aid of feed rollers.
Specifications

Specifications

Applicable Materials:
Flat materials like tape with 3 to 20mm

Machine Frame:
One of multi spindle on the frame

Driving Mechanism:
Spindle drive

Control Device:
By SCR control with dancer roller

Traverse Mechanism:
Bobbin traverse by means of scroll cam, variable traverse mechanism

Shape of Package:
  1. Square end or taper end cheese
  2. traverse Length: Variable 55~155mm or 150~250mm


Package Diameter:
Maximum 400mmø

Winding Speed:
Maximum 100m/min

Motor & Electricity:
Variable speed type AC motor 100W 3 phase 200/220V 50/60HZ