These furnaces are designed specifically for carbonizing activated carbon fiber.
Various mechatronics products use THK linear guide products. These units can be equipped with servo or stepper systemsfor off-the-shelf integration or can be supplied to work with drive systems supplied by the user.
These tray pusher type furnaces are most popular in applications for heat treatment of powder materials.
The AeroJet is a non-contact jet dispenser designed for mid to high viscosity materials. Non-Contact dispensers enable dispensing from a distance, eliminate the need for z-axis adjustment, and contribute to high output.
The Awatraon3 is a centrifuge to remove bubbles from the liquid in syringes.
The Ball Screw is a high-efficiency feed screw with the ball making a rolling motion between the screw axis and the nut. Compared with a conventional sliding screw, this product has drive torque of one-third or less, making it most suitable for saving drive motor power.
The Ball Spline is a rolling guide spline bearing. This is an innovative product with a ball rolling on a groove connected to the shaft, realizing allowable loads greater than with linear bushing and enabling torque transmission while making linear movements.
According to the demands for applying a certain twist on delicate high performance fibers such as carbon fibers, Ceramic Fibers, Fiber Glass, etc., Kamitsu has developed a high speed unrolling twisting machine that does not cause damage to the fibers. The package is rotated in the cage and fiber is unrolled with uniform and constant twists. Unwinding twists are eliminated during unwinding. The number of twists can be obtained by coordinating the unrolling speed with the cage RPM (Max. 1,000 RPM). A machine with multi-built units can also be used as a doubling/twisting machine. The Kamitsu UT Twist and Detwist machine is for use with delicate fiber or yarn without damaging the yarn.
Ideal for use in carbon fiber production, this portable length and speed counter can be used to verify speed accuracy in fiber production processes or web production processes. It can also be used with any equipment with drive rollers to calibrate or set the roller speeds.
The feed-roller acts as a speed controller for any process. It has high accuracy speed control, and uses a double roller system to control the fiber speed. It is useful for laboratory type lines, pilot lines, and also scalable for large scale production lines.
The KS-7 was developed to size various fibers, spun yarns (cotton, silk, hemp yarns, etc) as well as a variety of filament yarns to prevent fuzz, improve strength and sustain elongation properties. Linking three processes (coating/sizing, drying, and winding) into one machine dramatically improves efficiency, quality, and contributes to saving space. The KS-7 is ideal for the recent trend of manufacturing a wide variety of fabrics in small lots, at minimum time, with frequent style change.
Single tow and multiple tow spreading machine can spread a single tow of carbon fiber or multiple tow of carbon fiber. The system can also be used for other types of fiber. The fiber spreaders can be used for various applications: fiber spreading to improve impregnation of the tow, fiber spreading to make lighter materials, fiber spreading to manufacture thinner sheet materials,…etc.